CDI Digital Module - 4 Cycle (Spark Management)
Ignition Module Paramaters:
• Timing control, customized
• Precise speed governing
- Unaffected by air gap
- Unaffected by flywheel magnet flux level
- Unaffected by temperature
• Smart on-board intelligence
- Idle stability feedback
- Improved cold starting
- Improved warm-up
- Fast idle control
- Improved acceleration
- Lower cost approach, self-powering
- Precise cut-in
- Optimized engine power
- Reduced kick back
- Spark management
• Integrated battery charger option |
|
CDI Digital Module with Integrated ECU
Ignition Module Paramaters:
• Controlled input and output ports
- Safety switches/interlocks
- Temperature sensor
- Voltage regulator control
- Oil level/pressure
- Service reminder
- Hour meter
• Addresses warranty issues
- Maximum engine temperature
- Maximum engine speed
- Oil pressure |
|
MA Digital
Ignition Module Paramaters:
• Timing advance, customized
• Precise speed governing, +-300 RPM
- Unaffected by air gap
- Unaffected by flywheel magnet flux level
- Unaffected by temperature
• Momentary kill function
• Smart on-board intelligence, idle feedback stability
• Precise cut-in
• Improved low-end output performance, easier starting
• Lower cost approach, self-powering |
|
MA Easy start with positive off and auto on
Ignition Module Parameters:
• Improved low-end output performance, easier starting
• Timing advance at starting, eliminates kick back
• Momentary Kill function, Positive Off, Auto On - Warranty driven
• Patent received |
|
MA Linear Timing with Speed Governing
Ignition Module Parameters:
• Speed governing with no loss of spark energy
• Ramp timing, improved power at higher RPM
• Longer spark duration
• Improved low-end output performance, easier starting
• Spark to kill terminal protection
• Patent received |
|
MA Standard
Basic module designed for high volume, low cost trimmers and chain saws.
Features available:
• Analog timing advance, improved low-end output performance, easier starting
• Speed governing - Safety/warranty driven
• Three-second kill function
• Ramp-type timing improved power at higher RPM
• Microprocessor capability |
|
MB Digital
Ignition Module Parameters:
• Smaller package
• Timing advance, customized
• Precise speed governing, +/- 300 RPM
- Not sensitive to air gap
- Not sensitive to flux level
- Not sensitive to temperature
• Momentary kill function
• Smart on board intelligence - idle feedback stability
• Precise cut-in
• Higher low end output performance
• Lower cost approach, self powering |
|
MB Standard
Basic module designed for high volume trimmers, brush cutters and chain saws. Smaller aerodynamic package.
Features available:
• Analog timing advance
- Reduced kickback
- Optimized engine power
• Analog timing retard at higher RPM
- Speed limiting timing retard
- Gradual speed limiting
• Improved low-end output performance, easier starting
• Speed governing
• Microprocessor capability |
|
MB Timing advance and extended spark duration
Ignition Module Parameters:
• Analog timing advance
- Eliminates kick back
- Gradual timing advance
- Flat timing in idle range
- Economical solution
• Improved engine performance
• Improved low-end output performance, easier starting
• Extended spark duration, 4-5 times over standard MB
• Retarded and flattened timing at idle for easier carburetor adjustment |
|
MB Timing advance and timing retard for speed governing
Ignition Module Parameters:
• Analog timing advance
- Gradual timing advance: 20-40 degrees
- Economical solution
• Analog timing retard at higher RPM
- Speed limiting timing retard
- Gradual speed limiting
• Improved low-end output performance, easier starting
• Cost comparable to speed governing module
• Additional features in smaller module
• Patent filed |
View Cart | My Account