LMF
The LMF carburetor series is a mid-sized model designed for 4 stroke engines ranging from 250 to 400 cc displacement. This high value model meets EPA and CARB emissions regulations.
Technical Data:
• Dimensions in mm:
- Choke Bore: 30
- Venturi 0: 14 to 18
- Throttle Bore: 24
• Horizontal throttle shaft
• Mounting hole distance between centers: 48mm
• Through-bolt mounting design
• Can be delivered with or without choke
• Self-relieving choke optional
• Fixed high speed jet
• Adjustable idle needle
• Shut-off solenoid available
• Vibration isolated inlet needle available
• Internal bowl venting |
|
|
LMJ
The LMJ carburetor series is designed for 4 stroke engines ranging from 100 to 270 cc displacement. The LMJ features EPA and CARB emissions approved design.
Technical Data:
• Dimensions in mm:
- Choke Bore: 24
- Venturi 0: 13 to 15
- Throttle Bore: 18
• Mounting hole distance between centers: 40 or 42 mm
• Vertical throttle shaft
• Through-bolt mounting design
• Can be delivered with or without choke
• Self-relieving choke or primer system optional
• Fixed high speed jet
• Adjustable idle needle
• Bowl drain optional
• Shut-off solenoid available
• Vibration isolated inlet needle available |
|
LMK
The LMK carburetor series is a mid-sized model designed for 4 stroke engines ranging from 340 to 490 cc displacement. This high value model meets EPA and CARB emissions regulations.
Technical Data:
• Dimensions in mm:
- Choke Bore - 31.8
- Venturi Ø - 20.5 to 22.2
- Throttle Bore - 26.6
• Mounting hole distance between centers: 52 mm
• Vertical throttle shaft
• Through-bolt mounting design
• Can be delivered with or without choke
• Self-relieving choke optional
• Fixed high speed jet
• Adjustable idle needle
• Shut-off solenoid available |
|
LMT
The LMT carburetor series is a mid-sized model designed for 4 stroke engines ranging from 340 to 500 cc displacement. This high value model meets EPA and CARB emissions regulations.
Technical Data:
• Dimensions in mm:
- Choke Bore: 30
- Venturi Ø: 19 to 22.2
- Throttle Bore: 25.4 to 26.9
• Mounting hole distance between centers: 54 mm
• Horizontal throttle shaft
• Through-bolt mounting design
• Can be delivered with or without choke
• Self-relieving choke optional
• Fixed high speed jet
• Adjustable idle needle
•Vibration isolated inlet needle available
•Shut-off solenoid available
•Internal bowl venting |
|
LMW
The LMW carburetor series is a mid-sized model designed for 4 stroke engines ranging from 125 to 225 cc displacement. This high value model meets EPA and CARB emissions regulations.
Technical Data:
• Dimensions in mm:
- Choke Bore 23.8
- Venturi Ø 14.3 to 15.8
- Throttle Bore 17.5 to 18.5
• Mounting hole distance between centers: 46 mm
• Vertical throttle shaft
• Through-bolt mounting design
• Can be delivered with or without choke
• Self-relieving choke optional
• Fixed high speed jet
• Adjustable idle needle |
|
LSB
The LSB carburetor series is designed for 4 stroke, twin cylinder engines ranging from 600 to 1,000 cc displacement. It has been specifically designed to meet EPA and CARB exhaust emission regulations and to assist in meeting future evaporative emission regulations.
Standard features include an emulsion idle system for improved off idle running quality employing a CARB-approved tamper-proof idle mixture system a WOT enrichment system to aid in precise calibration serviceable nozzle and flow-tested jets adjustable float, an dimproved warm and cold start features.
Technical Data:
• Choke Bore: 38mm
• Throttle bore: 25 mm standard
• Mounting hole distance between centers: 58 mm
• Horizontal throttle shaft
• Through-bolt mounting design
• Serviceable inlet seat
Options:
• Throttle bore to 33 mm, with appropriate venturi diameter
• Self-relieving choke
• Bowl drain
• Vibration-isolated inlet needle
• Shut-off solenoid
• Vacuum accelerator pump
• Several internal bowl venting configurations
• Various throttle shaft seal and/or bushing combinations |
|
PZ22
The PZ 22 carburetor series is designed for 4 stroke engines ranging from 90 to 200 cc displacement. This high value model meets EPA and CARB emissions regulations. Accepted as standard for world formula karting events.
Technical Data:
• Dimensions in mm:
- Venturi 0: 17.9
- Throttle Bore: 22.0
• Mounting hole distance between centers: 48 mm
• Piston (slide) valve throttle system
• Flange-bolt throttle mounting design
• Self-relieving choke optional
• Fixed high speed jet
• Adjustable idle needle
• Bowl drain standard |
|
PZ26
The PZ 26 carburetor series is designed for 4 stroke engines ranging from 150 to 300 cc displacement. This high value model meets EPA and CARB emissions regulations. Standard carburetor platform for competition karting events.
Technical Data:
• Dimensions in mm:
- Venturi Ø:  22
- Throttle Bore:  26
• Mounting hole distance between centers: 48 mm
• Piston (slide) valve throttle system
• Flange-bolt mounting design
• Multi-position choke for warm-up
• Fixed high speed jet
• Adjustable idle needle
• Bowl drain standard |
|
WHG
The WHG carburetor series is a model designed for 4 stroke engines ranging from 400 to 600 cc displacement. This high value model can meet EPA and CARB emissions regulations
Technical Data:
• Dimensions in mm:
- Choke Bore - 34.9
- Venturi Ø - 20.6 to 25.4
- Throttle Bore - 27.0 to 30.1
• Mounting hole distance between centers: 58.1 mm
• Vertical or horizontal throttle shaft orientations
• Flange-bolt mounting design
• Can be delivered with or without choke
• Fixed or adjustable high speed jet
• Adjustable idle needle
• Screw-in main jet |
|
WHL
The WHL carburetor series is a mid-sized model designed for 4 stroke engines ranging from 125 to 250 cc displacement. This high value model can meet EPA and CARB emissions regulations.
Technical Data:
• Dimensions in mm:
- Choke Bore: 27.0
- Venturi Ø: 14.3 to 20.65
- Throttle Bore: 20.7 to 23.8
• Mounting hole distance between centers:43.8 mm Vertical throttle shaft
• Flange-bolt mounting design
• Can be delivered with or without choke
• Fixed or adjustable high speed jet
• Adjustable idle needle
• Screw-in main jet |
|
WPF
The WPF carburetor series is a mid-sized model designed for 4 stroke engines ranging from 100 to 125 cc displacement. This high value model meets EPA and CARB emissions regulations.
Technical Data:
• Dimensions in mm:
- Choke Bore: 14
- Venturi Ø: 10
- Throttle Bore: 10
• Piston (slide) valve throttle system
• Intake tube mounting diameter: 16 mm
• Internal choke standard
• Fixed high speed jet
• Bowl drain |
|
WVF
The WVF carburetor model is designed for 4 stroke engines requiring a constant velocity venture ranging from 100 to 250 cc displacement. This high value model meets EPA and CARB emissions regulations.
Technical Data:
• Dimensions in mm:
- Choke Bore - 38 to 48
- Venturi Ø - 20 to 30
- Throttle Bore - 24 to 34
• Throttle mounting O.D. 32mm/34mm/40mm
• Choke mounting O.D. 42mm/44mm/52mm
• Horizontal throttle shaft
• Deceleration enrichment system optional
• Temperature sensitive starting enrichment available
• Accelerator pump available
• Fixed high speed jet
• Adjustable idle circuit
• Bowl drain standard
• Variable venturi (CV) design
• Electronic acceleration nozzle optional |
View Cart | My Account